State-of-the-art UPS technology for your security
Almost every area of our life depends on digitally controlled systems. A power failure at the wrong time can be costly and dangerous. UPS systems from Wöhrle are therefore indispensable in almost all critical infrastructures.
Maximum security in all areas
In contrast to the public power grid, UPS systems always provide a perfect and clean voltage of the highest quality. The systems also bridge grid outages with their own energy storage. Thus, IT systems are always supplied perfectly and without disruptions. Furthermore, system failures caused by all types of grid faults are avoided.
Whether in-house, container or edge data centers, server rooms or mega data centers - we offer small rack solutions with just a few kVA as well as cabinet solutions with up to several MVA.
Resistance to dirt, temperature, humidity, and vibrations is a key requirement. So is the use of alternative energy storage systems with extended temperature ranges, high power density, and low self-discharge. If additional resistance to interference voltages, voltage and frequency fluctuations and load peaks is required, standard UPS systems are not an option. Wöhrle products provide you with innovative and customized solutions.
Wöhrle UPS systems can withstand high dynamic peak loads and meet practically any redundancy requirement due to their modular design. Thanks to various communication standards, the systems can also be integrated into the building management system.
The secure and reliable operation of critical and system-relevant infrastructures, including water supply, authorities, emergency services, and disaster control, requires a highly available, scalable, energy-efficient, and uninterruptible power supply.
Our catalog - All solutions at a glance
Everything according to plan - precise and reliable
Location, performance, budget and much more. The list of requirements is long. This makes it important to consider everything in the course of the planning stage. Thanks to our experience, specialist expertise and a wide range of individually configurable components, we are one of the few companies on the market that can implement power supply systems for almost any environment.
Good reasons? Here you go.
Flexible
We plan our UPS systems for the long term and with focus on scalability and redundancy.
Efficient
UPS as an integral part of your sustainability strategy thanks to low energy consumption.
Proportionate
Keep an eye on budgets - maximum performance with minimum operating costs (TCO).
Compact
Our UPS systems are designed to fit any location.
Modular
UPS monoblock devices or UPS plug-in systems in the power range of up to several MVA.
Complete
From concept to disposal - perfect service and support throughout the entire lifecycle of your UPS.
No matter the
challenge, we
keep our cool
Hard shell. Hard core.
Dust, oils, heat, sub-zero temperatures, high altitudes, vibrations or humidity are just some of the conditions that you may face. Therefore, the correct selection and coordination of components, taking into account the location, ensures the operation of a sustainable system and reduces maintenance costs.
With additional systems, we are able to cover a working range from -40 to +55 °C. This technology is used, for example, in blast furnaces or wind turbines.
UPS systems from Wöhrle can cope with fluctuations between 35 and 70 Hertz at the input and still maintain the desired output frequency and voltage. This makes it possible, for example, to export German machines to countries with greater fluctuations in mains frequency and voltage without having to adapt the machines.
Supply voltages in industrial environments are often subject to high levels of contamination. These can be interference voltage peaks caused by the switching of large loads or voltage dips due to consumers starting up.
We offer high resistance to both wired and wireless interference. A UPS system can only reliably fulfill this requirement if it generates and controls its output voltage completely independently of the input. For this reason, only UPSs of the VFI type, formerly known as online continuous converters, make sense in the industrial sector.
Protection class IP54 is often required for the housing to protect the electronics from splash water and dirt - in aggressive environments, a stainless steel housing is also required. Based on a robust basic configuration, your products can be protected with additional measures on request. These include shock and vibration dampers as well as air filters and reinforced seals on all housing openings.
Many people are unaware of the dependence of energy storage systems on the ambient temperature. Deviations from the standard temperature (20 °C) drastically shorten the time to replacement. Depending on the application, different energy storage systems are used. Cyclone cells, for example, have a three times longer service life of up to 15 years and work in temperature ranges between at least -30 °C and 65 °C. These cells are more expensive than lead-acid cells. Such cells are more expensive than lead batteries, but offer advantages in environments where downtimes for maintenance must be reduced to an absolute minimum. Lithium batteries or capacitive storage devices, so-called supercapacitors, are also an interesting alternative for demanding applications in industrial environments.
Communication between the system and the administrator and the devices to be protected normally takes place via different protocols and media in an industrial environment than in a data center. If the UPS manufacturer can offer Industrial Ethernet or Profibus as a standard interface, this makes integration much easier. USB, RS-232 or RS-485 ports as well as potential-free switching contacts are also in demand from users and are available from Wöhrle power supply systems.
Goodbye expensive energy guzzlers
Modern systems now achieve an efficiency of well over 97 % - this means that up to 60 % of energy can be saved and a new system usually pays for itself in just a few years. We check your system and create a valid and individual energy loss measurement: full transparency!
+ € 295 for each additional system ordered at the same time
If you order a new three-phase system, you will receive 50 % credit of the service amount on the hardware order (kickback).
+ 375 € for each additional system with simultaneous commissioning
If you order a new three-phase system, you will receive 50 % credit of the service amount on the hardware order (kickback).
+ 550 € for each additional system with simultaneous commissioning
If you order a new three-phase system, you will receive 50 % credit of the service amount on the hardware order (kickback).
590 € (net) *
+ € 295 for each additional system ordered at the same time
* When ordering a new three-phase system, you will receive 50 % credit of the service amount on the hardware order (kickback)
750 € (net) *
+ 375 € for each additional system with simultaneous commissioning
* When ordering a new three-phase system, you will receive 50 % credit of the service amount on the hardware order (kickback)
1,250 € (net) *
+ 550 € for each additional system with simultaneous commissioning
* When ordering a new three-phase system, you will receive 50 % credit of the service amount on the hardware order (kickback)
Already setting the best example
Gain an insight into our implementation strategies. From planning and implementation to support, Wöhrle is at your side as a reliable partner.
Let's find the right solution together!
UPS systems
UPS Systems for Reliable Power Supply in Critical Applications
UPS systems are indispensable wherever power outages, voltage fluctuations, or frequency fluctuations must not lead to system downtime, data loss, or process interruptions. In IT infrastructures, production environments, data centers, control systems, or critical operational areas, it is not just the power supply itself that matters, but the reliable availability of the connected systems.
Wöhrle SVS develops and implements UPS systems for professional and industrial applications. The focus is not on supplying individual components, but on providing a technically suitable solution: designed with performance, load profile, runtime, environment, scalability, and serviceability in mind. The result is an uninterruptible power supply that responds reliably in an emergency and safeguards the operation of critical systems.
Why UPS Systems Are Essential for Businesses
A UPS system protects connected equipment from common power grid issues such as power outages, voltage sags, overvoltage, or frequency fluctuations. For businesses, even a brief interruption can have significant consequences: machines stop running, servers go down, data is corrupted, or safety-critical systems no longer function reliably.
Typical areas of application include server rooms, data centers, production lines, process control systems, security and communications systems, medical applications, and critical infrastructure. It is crucial that the UPS system not be selected arbitrarily, but rather be tailored to the actual application.
Custom UPS Systems for IT, Industry, and Infrastructure
In a competitive environment, high availability, efficiency, and scalable UPS solutions are often cited as key selling points. It is precisely these requirements that must be properly implemented in practice. Wöhrle SVS therefore takes a holistic view of the entire system: Which loads need to be protected? How long must power be bridged? Which battery technology makes sense? What level of redundancy is required?
Depending on the project, standard solutions, customized systems, or custom solutions are used. Battery systems, control cabinets, infrastructure, and future maintenance are also factored into the planning.
From Planning to Service
Wöhrle SVS supports companies every step of the way—from consulting and project planning through installation and commissioning to maintenance, repair, and disposal. This reduces coordination points, improves operational reliability, and provides long-term planning certainty throughout the entire life cycle of the UPS system.
Frequently Asked Questions About UPS Systems
What is a UPS system?
A UPS is a system that provides an uninterruptible power supply. It continues to supply power to connected devices during power disturbances or outages and protects sensitive equipment from sudden power interruptions.
When does a company need a UPS system?
A UPS system is useful when it is necessary to prevent outages of IT equipment, machinery, control systems, communication systems, or safety-critical equipment.
Which UPS system is suitable?
This depends on power output, runtime, the environment, load profile, and safety requirements. A technical design is therefore crucial.
Does Wöhrle SVS also handle service and maintenance?
Yes. Wöhrle SVS provides support not only for planning and implementation, but also for maintenance, repairs, and lifecycle management.